Establish Coordinates - Anywhere - Leica Builder Series User Manual

Builder, Station Setup, for Builder 200 or higher
9.3.3
Description
Diagram

Establish Coordinates - Anywhere

The Setup method Establish Coordinates - Anywhere is used to set up the instru-
ment on an unknown point and set the orientation by measuring angles and
distances to a minimum of two known target points and a maximum of five target
points. Beside the computation of the position, the height is also computed if the
measured target point has a known height. If more than two known target points
were used, the quality of the new station is shown in the result screen.
P1
P0
P2
P0
P3
P1
P2
P3
Station
First known point
Second known point
Third known point
102