11.5
Description
View a measure-
ment step-by-step
Builder, Data Management Mode, for Builder 300 or higher
Measurements
Measurement data contains at least horizontal angle, vertical angle, horizontal
distance, slope distance, height difference, data, time and if applicable, line, offset,
easting, northing and height coordinates.
Measurement data can be:
•
viewed
•
deleted
•
downloaded for data transfer to a further program
1. Make sure that DATA Mode is active.
2. Press
to set <Type:> Measurement.
3. Press
to set focus on <Pt:>.
4. Press
to toggle through the points.
The coordinates are displayed on same screen.
5. Press POINTS to access point management.
Measurement values are displayed.
153