Jobs - Leica Builder Series User Manual

11.3
Description
Active job
Default job
Create a new job
step-by-step
Builder, Data Management Mode, for Builder 300 or higher

Jobs

Jobs are a summary of different types of data, for example fixpoints, measurements,
result, etc. The job definition consists of the input of job name, operator and remark.
Additionally, the system generates time and date at the time of creation.
The active job is the one in which data is stored to. One job is always considered the
active job.
A job called Default is always available on the instrument. The job Default is active
until a user defined job is created and selected.
1. Make sure that DATA Mode is active.
2. Press JOB to access job management.
3. Press NEW to create a new job.
4. Enter new job name.
5. Accept with OK.
The new job is set as active job.
149