Leica Builder Series User Manual page 44

Builder, Operation
Setup step-by-step
3
1
1. Extend the tripod legs to allow for a comfortable working posture. Position the
tripod over the marked ground point, centring it as well as possible.
2. Fasten the tribrach and instrument onto the tripod.
3. Turn on the instrument by pressing the
The electronic level and laser plummet are activated automatically after switching
on the instrument, if compensator is set to on.
4. Move the tripod legs (1) and use the tribrach footscrews (6) to centre the
plummet (4) over the ground point.
2
6
1
1
key.
7
5
5
4
5
44