Leica Builder Series User Manual page 97

Shifting Line Start-
point
Diagram
Builder, Station Setup, for Builder 200 or higher
In Setup method Establish Control line - Anywhere line startpoint can be shifted
to use another origin for the local coordinate system. If the entered line value is posi-
tive the start point moves forward otherwise backward. The start point gets a right-
ward shift if the entered offset value is positive otherwise a leftward shift.
Hz = 0.000
P2
a
P3
b
P1
P1 Line start point
P2 Second line point
P3 Shifted line start point, new
origin of local coordinate system
a Offset value for shift
b Line value for shift
97