Pointsearch - Leica Builder Series User Manual

Builder, Program Mode, for Builder 200 or higher
8.3
Description

Pointsearch step-
by-step

Pointsearch

Pointsearch is a global function used by applications and setups, for example to find
internally saved measured or fixed points.
Descriptions apply to Builder 300 or higher. Available options depend on the model.
1. Turn on the instrument by pressing the
2. Make sure that PROG mode is active.
3. Choose an application, for example Layout.
4. Press APPL to go back to application menu. (Only in application Layout)
5. Press P-List.
6. Enter in <Search ID:> the point identifier for that should be searched.
7. Press OK.
8. Press to select the point.
9. Press SELECT.
Now the point appears in the application that was active before.
key.
86