3-1-2] Trunk Group-Local Access Priority; 3-1-3] Caller Id Modification - Panasonic KX-TDA50 Pc Programming Manual

2.10 [3] Group
Feature Manual References
1.8.5 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
2.10.2 [3-1-2] Trunk Group—Local Access Priority
Trunk groups can be assigned a priority for Idle Line Access. When making a CO line call by Idle Line
Access, the PBX will search trunk groups for an idle CO line according to the priority assigned here.
Trunk Group No. & Name
Specifies the trunk group assigned to the corresponding priority level.
Select the blank option to not assign a trunk group to the priority.
Default
Priority 1–64 = Trunk Group No. 1–64
Value Range
For KX-TDA50/KX-TDA100/KX-TDA200:
Trunk Group No. 1–64
For KX-TDA600:
Trunk Group No. 1–96
Maintenance Console Location
2.10.2 [3-1-2] Trunk Group—Local Access Priority
Programming Manual References
2.17.1 [10-1] CO Line Settings
Feature Manual References
1.3.14 CO Line Access
1.7.1 GROUP FEATURES

2.10.3 [3-1-3] Caller ID Modification

The telephone numbers of incoming callers can be modified automatically by a Caller ID Modification
Table, and then recorded for calling back.
Caller ID Modification
The PBX looks for incoming telephone numbers that begin with an area code programmed in the
Caller ID Modification Table assigned to that trunk group. If it finds such a code, it removes digits and
adds a number to the telephone number. If this modified telephone number is stored as a System
Speed Dialing number, the caller's name can be shown on a PT display and the call can be routed to
a certain extension (CLI destination). A maximum of 4 Caller ID Modification Tables, each containing
10 local/international call data and 1 long distance code, can be programmed. Each trunk group can
select a table for use. Select the desired table from the Modification Table list.
350 PC Programming Manual