Viewing Timing Module Information - AudioCodes Mediant 3000 User Manual

SIP User's Manual
The different Ethernet ports are located on the Mediant 3000 chassis as follows:

Control: Port 1A - bottom PEM module; Port 1B - top PEM module.

OAMP: Port 2A - bottom PEM module; Port 2B - top PEM module.

Media: Port 1 and Port 2 are located on the RTM-8410 blade.
Parameter
Active Port
Port Duplex Mode
Port Speed
26.3

Viewing Timing Module Information

The Timing Module Information page provides read-only, real-time information of the
device's timing modules (i.e., SAT blade).
Note:

To view the timing module information:

Open the Timing Module Information page (Status & Diagnostics tab > VoIP Status
menu > Timing Module Information).
Version 6.4
Table 26-1: Ethernet Port Information Parameters
Displays the active Ethernet port (1 or 2).
Displays the Duplex mode of the Ethernet port.
Displays the speed (in Mbps) of the Ethernet port.
This page appears only if the device is in HA mode.
Figure 26-4: Timing Module Information Page
Description
509
26. System Status
November 2011