AudioCodes Mediant 3000 User Manual page 214

Parameter
Max Number Of Registered
Users
[IPGroup_MaxNumOfRegUs
ers]
Inbound Message
Manipulation Set
[IPGroup_InboundManSet]
Outbound Message
Manipulation Set
[IPGroup_OutboundManSet]
Registration Mode
[IPGroup_RegistrationMode]
Authentication Mode
[PGroup_AuthenticationMod
e]
Authentication Method List
[IPGroup_MethodList]
Enable SBC Client Forking
[IPGroup_EnableSBCClient
Forking]
SIP User's Manual

This parameter is applicable only to SERVER-type IP Groups.

This classification is not relevant in cases where multiple IP Groups
use the same Proxy Set.
Maximum number of users belonging to this IP Group that can register
with the device. By default, no limitation exists for registered users.
Note: This field is applicable only to USER-type IP Groups.
Message Manipulation Set (rule) that you want to assign to this IP
Group for SIP message manipulation rule on the inbound message.
The Message Manipulation rules are configured using the
MessageManipulations parameter (see Configuring Message
Manipulations on page 408).
Message Manipulation Set (rule) that you want to assign to this IP
Group for SIP message manipulation on the outbound message. The
Message Manipulation rules are configured using the
MessageManipulations parameter (see Configuring Message
Manipulations on page 408).
Defines the registration mode for an IP Group:

[0] User initiates registrations (default)

[1] SBC initiate registrations (works only with User Info file) = Used
when the device serves as a client (e.g., with an IP PBX).

[2] No registrations needed = The device adds users to its
database in active state.
Defines the authentication mode.

[0] User Authenticates (default) = The device does not handle the
authentication, but simply passes the authentication messages
between the SIP user agents.

[1] SBC Authenticates (as client) = The device authenticates as a
client. It receives the 401/407 response from the proxy requesting
for authentication. The device sends the proxy the authorization
credentials (i.e., user name and password) according to one of the
following: 1) account defined in the Account table (only if
authenticating SERVER-type IP Group), 2) global username and
password parameters (only if authenticating SERVER-type IP
Group), 3) User Information file, or 4) sends request to users
requesting credentials (only if authenticating USER-type IP Group).

[2] SBC Authenticates (as server) = The device authenticates as a
server (using the User Information file).
Defines SIP methods that the device must challenge. Multiple entries
are separated by the forward slash "/". If none are defined (default), no
methods are challenged.
Enables call forking for USER-type IP Groups.

[0] No (default)

[1] Yes = The device forks INVITE messages (to up to five separate
SIP outgoing legs).
214
Description
Document #: LTRT-89712
Mediant 3000