Viewing Average Call Duration - AudioCodes Mediant 3000 User Manual

SIP User's Manual
5. From the 'Type' drop-down list, select the SIP message type:
•
Invite - INVITE
•
Subscribe - SUBSCRIBE
•
Other - all SIP messages
To refresh the charts, click Refresh. To reset the counters, click Reset Counters.
28.4

Viewing Average Call Duration

The Average Call Duration page displays information about a specific SRD or IP Group.
This page includes two graphs:

Upper graph: displays the number of calls (INVITEs).

Lower graph: displays the average call duration.
Note:

To view average call duration:
1. Open the Average Call Duration page (Status & Diagnostics tab > Performance
Monitoring menu > Average Call Duration).
Version 6.4
This page is available only if the SBC application has been enabled.
Figure 28-4: Average Call Duration Graph
517
28. Performance Monitoring
November 2011