AudioCodes Mediant 3000 User Manual page 740

Parameter
Source Phone Number Manipulation for IP-to-Tel Calls Table
Web: Source Phone Number
Manipulation Table for IP > Tel Calls
EMS: EMS: SIP Manipulations >
Source IP to Telcom
[SourceNumberMapIP2Tel]
SIP User's Manual
NumberMapTel2Ip_LeaveFromRight,
NumberMapTel2Ip_Prefix2Add,
NumberMapTel2Ip_Suffix2Add,
NumberMapTel2Ip_IsPresentationRestricted,
NumberMapTel2Ip_SrcTrunkGroupID, NumberMapTel2Ip_
SrcIPGroupID;
[\NumberMapTel2Ip]
For example:
NumberMapTel2Ip 0 = 01,$$,*,0,0,2,$$,$$,971,$$,$$,$$,$$;
NumberMapTel2Ip 1 =
10,10,*,255,255,3,0,5,100,$$,255,$$,$$;
Notes:

This table parameter can include up to 120 indices (0-
119).

The manipulation rules are done in the following order:
RemoveFromLeft, RemoveFromRight, LeaveFromRight,
Prefix2Add, and then Suffix2Add.

If the called and calling numbers match the
DestinationPrefix and/or SourcePrefix conditions, then
the parameters NumberType, NumberPlan,
RemoveFromLeft, RemoveFromRight, Prefix2Add,
Suffix2Add, and/or LeaveFromRight are applied.

Number Plan and Type can be used in the Remote-Party-
ID header by configuring the EnableRPIHeader and
AddTON2RPI parameters.

The following parameters are not applicable:
SourceAddress and IsPresentationRestricted.

To configure manipulation of destination numbers for Tel-
to-IP calls using the Web interface, see 'Configuring the
Number Manipulation Tables' on page 282).

For a description on using ini file table parameters, see
'Configuring ini File Table Parameters' on page 88.
This parameter table manipulates the source number for IP-
to-Tel calls. The format of this parameter is as follows:
[SourceNumberMapIp2Tel]
FORMAT SourceNumberMapIp2Tel_Index =
SourceNumberMapIp2Tel_DestinationPrefix,
SourceNumberMapIp2Tel_SourcePrefix,
SourceNumberMapIp2Tel_SourceAddress,
SourceNumberMapIp2Tel_NumberType,
SourceNumberMapIp2Tel_NumberPlan,
SourceNumberMapIp2Tel_RemoveFromLeft,
SourceNumberMapIp2Tel_RemoveFromRight,
SourceNumberMapIp2Tel_LeaveFromRight,
SourceNumberMapIp2Tel_Prefix2Add,
SourceNumberMapIp2Tel_Suffix2Add,
SourceNumberMapIp2Tel_IsPresentationRestricted;
[\SourceNumberMapIp2Tel]
For example:
SourceNumberMapIp2Tel 0 =
22,03,$$,$$,$$,$$,2,667,$$,$$;
SourceNumberMapIp2Tel 1 =
034,01,1.1.1.1,$$,0,2,$$,$$,972,$$,10;
740
Description
Document #: LTRT-89712
Mediant 3000