AudioCodes Mediant 3000 User Manual page 765

SIP User's Manual
Parameter
Web: SAS IP-to-IP Routing Table
[IP2IPRouting]
Version 6.4

You can only configure one index entry.

For a detailed description of the individual parameters in this
table and for configuring this table using the Web interface,
see 'Manipulating Destination Number of Incoming INVITE'
on page 459.
This parameter table configures the IP-to-IP Routing table for
SAS routing rules. The format of this parameter is as follows:
[IP2IPRouting]
FORMAT IP2IPRouting_Index = IP2IPRouting_SrcIPGroupID,
IP2IPRouting_SrcUsernamePrefix, IP2IPRouting_SrcHost,
IP2IPRouting_DestUsernamePrefix, IP2IPRouting_DestHost,
IP2IPRouting_DestType, IP2IPRouting_DestIPGroupID,
IP2IPRouting_DestSRDID, IP2IPRouting_DestAddress,
IP2IPRouting_DestPort, IP2IPRouting_DestTransportType,
IP2IPRouting_AltRouteOptions;
[\IP2IPRouting]
For example:
IP2IPRouting 1 = -1, *, *, *, *, 0, -1, -1, , 0, -1, 0;
Notes:

This table can include up to 120 indices (where 0 is the first
index).

For a detailed description of the individual parameters in this
table and for configuring this table using the Web interface,
see 'Configuring IP2IP Routing Table (SAS)' on page 461.

For a description on configuring ini file table parameters, see
'Configuring ini File Table Parameters' on page 88.
765
32. Viewing Syslog Messages
Description
November 2011