Media; Configuring Voice Settings; Voice Gain (Volume) Control - AudioCodes Mediant 3000 User Manual

SIP User's Manual
12

Media

This section describes the media-related configuration.
12.1

Configuring Voice Settings

The Voice Settings page configures various voice parameters such as voice volume,
silence suppression, and DTMF transport type. For a detailed description of these
parameters, see 'Configuration Parameters Reference' on page 547.

To configure the voice parameters:
1. Open the Voice Settings page (Configuration tab > VoIP menu > Media submenu >
Voice Settings).
2. Configure the Voice parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 478.

12.1.1 Voice Gain (Volume) Control

The device allows you to configure the level of the received (input gain) Tel-to-IP signal
and the level of the transmitted (output gain) IP-to-Tel signal. The gain can be set between
-32 and 31 decibels (dB).
The procedure below describes how to configure gain control using the Web interface:
Version 6.4
Figure 12-1: Voice Settings Page
153
12. Media
November 2011