AudioCodes Mediant 3000 User Manual page 590

Parameter
Account Table
Web: Account Table
EMS: SIP Endpoints > Account
[Account]
Proxy Registration Parameters
Web: Use Default Proxy
EMS: Proxy Used
[IsProxyUsed]
Web/EMS: Proxy Name
[ProxyName]
Web: Redundancy Mode
EMS: Proxy Redundancy Mode
[ProxyRedundancyMode]
SIP User's Manual
This parameter table configures the Account table for
registering and/or authenticating (digest) Trunk Groups or IP
Groups (e.g., an IP-PBX) to a Serving IP Group (e.g., an
Internet Telephony Service Provider - ITSP). The format of this
parameter is as follows:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroup, Account_ServingIPGroup,
Account_Username, Account_Password, Account_HostName,
Account_Register, Account_ContactUser,
Account_ApplicationType;
[\Account]
For example:
Account 1 = 1, -1, 1, user, 1234, acl, 1, ITSP1;
Notes:

This table can include up to 32 indices (where 1 is the first
index).

The parameter Account_ApplicationType is not applicable.

You can define multiple table indices with the same
ServedTrunkGroup but different ServingIPGroups,
username, password, HostName, and ContactUser. This
provides the capability for registering the same Trunk Group
or IP Group to several ITSP's (i.e., Serving IP Groups).

For a detailed description of this table's parameters and for
configuring this table using the Web interface, see
'Configuring Account Table' on page 241.

For configuring ini file table parameters, see 'Configuring ini
File Table Parameters' on page 88.
Enables the use of a SIP proxy server.

[0] No = Proxy isn't used and instead, the internal routing
table is used (default).

[1] Yes = Proxy server is used. Define the IP address of the
proxy server in the Proxy Sets table (see 'Configuring Proxy
Sets Table' on page 215).
Note: If you are not using a proxy server, you must define
outbound IP call routing rules in the Outbound IP Routing
Table' (described in 'Configuring Outbound IP Routing Table'
on page 298).
Defines the Home Proxy domain name. If specified, this name
is used as the Request-URI in REGISTER, INVITE, and other
SIP messages, and as the host part of the To header in INVITE
messages. If not specified, the Proxy IP address is used
instead.
The value must be string of up to 49 characters.
Determines whether the device switches back to the primary
Proxy after using a redundant Proxy.

[0] Parking = device continues working with a redundant
(now active) Proxy until the next failure, after which it works
with the next redundant Proxy (default).
590
Description
Document #: LTRT-89712
Mediant 3000