Configuring Proxy And Registration Parameters - AudioCodes Mediant 3000 User Manual

17.4

Configuring Proxy and Registration Parameters

The Proxy & Registration page allows you to configure the Proxy server and registration
parameters. For a description of the parameters appearing on this page, see 'Configuration
Parameters Reference' on page 547.

To configure the Proxy and registration parameters:
1. Open the Proxy & Registration page (Configuration tab > VoIP menu > SIP
Definitions submenu > Proxy & Registration).
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. Click the Register or
register/unregister the device to a Proxy/Registrar. Instead of registering the entire
device, you can register specific entities ( Trunk Groups, and Accounts), by using the
Register button located on the page in which these entities are configured.
5. To save the changes to flash memory, see 'Saving Configuration' on page 478.
Click the Proxy Set Table
groups of proxy addresses. Alternatively, you can open this page from the Proxy Sets
Table page item (see 'Configuring Proxy Sets Table' on page
page).
SIP User's Manual
Figure 17-4: Proxy & Registration Page
Un-Register
button to Open the Proxy Sets Table page to configure
244
buttons to save your
215 for a description of this
Document #: LTRT-89712
Mediant 3000
changes and