Stand-Alone Survivability (Sas) Application; Overview; Sas Operating Modes - AudioCodes Mediant 3000 User Manual

SIP User's Manual
20 Stand-Alone Survivability (SAS)
Application
This section describes the Sand-Alone Survivability application.
20.1

Overview

The device's Stand-Alone Survivability (SAS) feature ensures telephony communication
continuity (survivability) for enterprises using hosted IP services (such as IP Centrex) or IP-
PBX in cases of failure of these entities. In case of failure of the IP Centrex, IP-PBX
servers (or even WAN connection and access Internet modem), the enterprise typically
loses its internal telephony service at any branch, between its offices, and with the external
environment. In addition, typically these failures lead to the inability to make emergency
calls (e.g., 911 in North America). Despite these possible points of failure, the device's SAS
feature ensures that the enterprise's telephony services (e.g., SIP IP phones or soft
phones) are maintained, by routing calls to the PSTN (i.e., providing PSTN fallback).
Notes:

20.1.1 SAS Operating Modes

The device's SAS application can be implemented in one of the following main modes:

Outbound Proxy: In this mode, SAS receives SIP REGISTER requests from the
enterprise's UAs and forwards these requests to the external proxy (i.e., outbound
proxy). When a connection with the external proxy fails, SAS enters SAS emergency
state and serves as a proxy, by handling internal call routing for the enterprise's UAs -
routing calls between UAs and if setup, routing calls between UAs and the PSTN. For
more information, see 'SAS Outbound Mode' on page 444.

Redundant Proxy: In this mode, the enterprise's UAs register with the external proxy
and establish calls directly through the external proxy, without traversing SAS (or the
device per se'). Only when connection with the proxy fails, do the UAs register with
SAS, serving now as the UAs redundant proxy. SAS then handles the calls between
UAs, and between the UAs and the PSTN (if setup). This mode is operational only
during SAS in emergency state. This mode can be implemented, for example, for
proxies that accept only SIP messages that are sent directly from the UAs. For more
information, see 'SAS Redundant Mode' on page 445.
Note:
Version 6.4
•
The SAS application is available only if the device is installed with the
SAS Software Upgrade Key.
•
The SAS feature is applicable only to Mediant 3000 Simplex (not HA).
•
Throughput this section, the term user agent (UA) refers to the
enterprise's LAN phone user (i.e., SIP telephony entities such as IP
phones).
•
Throughout this section, the term proxy or proxy server refers to the
enterprise's centralized IP Centrex or IP-PBX.
•
Throughout this section. the term SAS refers to the SAS application
running on the device.
It is recommended to implement the SAS outbound mode.

20. Stand-Alone Survivability (SAS) Application

443 November 2011