AudioCodes Mediant 3000 User Manual page 733

SIP User's Manual
Parameter
Web: Tel2IP Default Redirect Reason
[Tel2IPDefaultRedirectReason]
Web: Set Redirect number Screening
Indicator to TEL
EMS: Set IP To Tel Redirect
Screening Indicator
[SetIp2TelRedirectScreeningInd]
Web: Set IP-to-TEL Redirect Reason
[SetIp2TelRedirectReason]
Version 6.4
Determines the default redirect reason for Tel-to-IP calls
when no redirect reason (or "unknown") exists in the
received Q931 ISDN Setup message. The device includes
this default redirect reason in the SIP History-Info header of
the outgoing INVITE.
If a redirect reason exists in the received Setup message,
this parameter is ignored and the device sends the INVITE
message with the reason according to the received Setup
message. If this parameter is not configured (-1), the
outgoing INVITE is sent with the redirect reason as received
in the Setup message (if none or "unknown" reason, then
without a reason).

[-1] Not Configured (default) = Received redirect reason
is not changed

[1] Busy = Call forwarding busy

[2] No Reply = Call forwarding no reply

[9] DTE Out of Order = Call forwarding DTE out of order

[10] Deflection = Call deflection

[15] Systematic/Unconditional = Call forward
unconditional
Determines the value of the Redirect Number screening
indicator in ISDN Setup messages.

[-1] Not Configured (default)

[0] User Provided

[1] User Passed

[2] User Failed

[3] Network Provided
Defines the redirect reason for IP-to-Tel calls. If redirect
(diversion) information is received from the IP, the redirect
reason is set to the value of this parameter before the device
sends it on to the Tel.

[-1] Not Configured (default)

[0] Unkown

[1] Busy

[2] No Reply

[3] Network Busy

[4] Deflection

[9] DTE out of Order

[10] Forwarding DTE

[13] Transfer

[14] PickUp

[15] Systematic/Unconditional
733
32. Viewing Syslog Messages
Description
November 2011