Configuring Rfc 2833 Payload - AudioCodes Mediant 3000 User Manual

12.3.3.2 Configuring RFC 2833 Payload

The procedure below describes how to configure the RFC 2833 payload using the Web
interface:

To configure RFC 2833 payload using the Web interface:
1. Open the RTP/RTCP Settings page (Configuration tab > VoIP menu > Media
submenu > RTP/RTCP Settings).
2. Configure the following parameters:
•
'RTP Redundancy Depth' (RTPRedundancyDepth) - enables the device to
generate RFC 2198 redundant packets.
•
'Enable RTP Redundancy Negotiation' (EnableRTPRedundancyNegotiation) -
enables the device to included the RTP redundancy dynamic payload type in the
SDP, according to RFC 2198.
SIP User's Manual
Figure 12-5: RTP/RTCP Settings Page
172
Mediant 3000
Document #: LTRT-89712