CHAPTER 50 System Status
Viewing Voice Port Information
You can view detailed information per voice port. The information is grouped under the following
tabs:
■
SIP: Displays SIP-related information such as endpoint status (e.g., idle) and phone number
■
Basic: Displays information such as call duration and analog information such as line voltage,
hook status (off or on), and polarity reversal.
■
RTP/RTCP: Displays RTP/RTCP-related information such as packet loss and network jitter.
■
Voice Settings: Displays voice-related configuration such as silence suppression.
➢
To view information on an analog port:
1.
Open the Monitor home page (see
2.
On the graphical display of the device, click a port; a shortcut menu appears.
3.
From the shortcut menu, choose Port Status.
●
For digital ports: The Trunks & Channel Status page appears (see
Channel
●
For analog ports: The following page appears with the Basic tab selected:
4.
To view additional channel information, click the required tab - SIP, RTP/RTCP, and Voice
Settings.
Field
SIP
Endpoint Status
Viewing Device Status on Monitor
Status). Click a channel; the following page appears with the Basic tab selected:
Table 50-3: Port Status Description
Status of endpoint:
■
"IDLE": No call
■
"ACTIVE": Active call
- 928 -
Mediant 1000 Gateway & E-SBC | User's Manual
Page).
Viewing Trunk and
Description