Viewing Active Ip Interfaces - AudioCodes Mediant 3000 User Manual

SIP User's Manual

To view detailed channel information of a trunk's channel:
1. Click a required channel pertaining to a trunk for which you want to view information;
the 'Basic Channel Information page appears, displaying basic information about the
channel:
2. To view additional channel information, click the buttons (SIP, Basic, RTP/RTCP, and
Voice Settings) located above on the page.
29.2

Viewing Active IP Interfaces

The IP Interface Status page displays the device's active IP interfaces, which are
configured in the Multiple Interface Table page (see 'Configuring IP Interface Settings' on
page 106).

To view the Active IP Interfaces page:

Open the IP Interface Status page (Status & Diagnostics tab > VoIP Status menu >
IP Interface Status).
Version 6.4
Figure 29-3: Basic Channel Information Page
Figure 29-4: IP Interface Status Page
521
29. VoIP Status
November 2011