AudioCodes Mediant 3000 User Manual page 760

Parameter
IP to IP Outbound Manipulation Table
Web: IP to IP Outbound
Manipulation
EMS: IP to IP Outbound
Manipulation
CLI: configure voip > sbc
manipulations ip-outbound-
manipulation
[IPOutboundManipulation]
SIP User's Manual
IPInboundManipulation_LeaveFromRight,
IPInboundManipulation_Prefix2Add,
IPInboundManipulation_Suffix2Add;
[\IPInboundManipulation]
For example:
IPInboundManipulation 1 = 0, 0, 0, -1, *, abc, *, *, 0, 0, 0, 255, , ;
Notes:

This table can include up to 100 indices.

For SIP URI host name (source and destination) manipulations,
you can also use the IP Group table. These host names are
simply replaced with the names configured for the Source and
Destination IP Groups respectively.

For a detailed description of the table's individual parameters
and for configuring the table using the Web interface, see
'Configuring IP-to-IP Inbound Manipulations' on page 411.

For a description on configuring ini file table parameters, see
'Configuring ini File Table Parameters' on page 88.
This parameter table configures the IP to IP Outbound
Manipulation table. This table allows you to manipulate the SIP URI
user part (source and/or destination) of the outbound SIP dialog
message. The format of this parameter is as follows:
[IPOutboundManipulation]
FORMAT IPOutboundManipulation_Index =
IPOutboundManipulation_IsAdditionalManipulation,
IPOutboundManipulation_ManipulatedURI,
IPOutboundManipulation_SrcIPGroupID,
IPOutboundManipulation_DestIPGroupID,
IPOutboundManipulation_SrcUsernamePrefix,
IPOutboundManipulation_SrcHost,
IPOutboundManipulation_DestUsernamePrefix,
IPOutboundManipulation_DestHost,
IPOutboundManipulation_RequestType,
IPOutboundManipulation_RemoveFromLeft,
IPOutboundManipulation_RemoveFromRight,
IPOutboundManipulation_LeaveFromRight,
IPOutboundManipulation_Prefix2Add,
IPOutboundManipulation_Suffix2Add,
IPOutboundManipulation_PrivacyRestrictionMode;
[\IPOutboundManipulation]
For example:
IPOutboundManipulation 1 = 0, 0, 2, -1, *, *, *, *, 1, 3, 0, 255, , , 0;
Notes:

This table can include up to 100 indices (where 0 is the first
index).

Manipulated destination SIP URI user names are done on the
following SIP headers: Request URI, To, and Remote-Party-ID
(if exists). Manipulated source SIP URI user names are done on
the following SIP headers: From, P-Asserted (if exists), P-
Preferred (if exists), and Remote-Party-ID (if exists).

For SIP URI host name (source and destination) manipulations,
you can also use the IP Group'table. These host names are
simply replaced with the names configured for the Source and
760
Description
Document #: LTRT-89712
Mediant 3000