Configuring Media Realms - AudioCodes Mediant 3000 User Manual

5. Click Apply to save your settings.
6. To save the changes to flash memory, see 'Saving Configuration' on page 478.
Notes:
12.7

Configuring Media Realms

The Media Realm Table page allows you to define a pool of up to 64 SIP media interfaces,
termed Media Realms. Media Realms allow you to divide a Media-type interface (defined in
the Multiple Interface table - see 'Configuring IP Interface Settings' on page 106) into
several realms, where each realm is specified by a UDP port range. In addition, you can
define the maximum number of sessions per Media Realm. Once created, Media Realms
can be assigned to IP Groups (in the IP Group table - see 'Configuring IP Groups' on page
208) or SRDs (in the SRD table - see 'Configuring SRD Table' on page 203).
For each Media Realm you can configure Quality of Experience parameters and their
thresholds for reporting to the AudioCodes SEM server used for monitoring the quality of
calls. For configuring this, see 'Configuring Quality of Experience Parameters per Media
Realm' on page 186.
Notes:
SIP User's Manual
•
You must either use the 'DSP Templates page or the
DSPVersionTemplateNumber parameter to select the DSP template, not
both. The DSP Templates page must be used only when two concurrent
DSP templates are required; the DSPVersionTemplateNumber
parameter must be used only when a single template is used.
•
If no entries are defined, the device uses the default DSP template (i.e.,
Template 0).
•
For supported DSP templates, see 'DSP Templates' on page 821.
•
For configuring the Web interface's tables, see 'Working with Tables' on
page 50.
•
If different Media Realms are assigned to an IP Group and to an SRD,
the IP Group's Media Realm takes precedence.
•
For this setting to take effect, a device reset is required.
•
You can also configure the Media Realm table using the ini file table
parameter CpMediaRealm.
182
Mediant 3000
Document #: LTRT-89712