Viewing Timing Module Information - AudioCodes Mediant 3000 User Manual

The 'Trunks & Channels Status' page also allows you to view detailed information regarding
a selected trunk channel, as described in the procedure below.
To view detailed channel information of a trunk's channel:
1. Click a required channel pertaining to a trunk for which you want to view information;
the 'Basic Channel Information' page appears, displaying basic information about the
channel:
2. To view additional channel information, click the buttons (SIP, Basic, RTP/RTCP, and
Voice Settings) located above on the page.
3.5.1.8

Viewing Timing Module Information

The 'Timing Module Information' page provides read-only, real-time information of the
device's timing modules (i.e., SAT blade).
Note:
To view the timing module information:
Open the 'Timing Module Information' page (Status & Diagnostics tab > Status &
Diagnostics menu > Timing Module Information page item).
SIP User's Manual
Figure 3-120: Basic Channel Information Page
This page appears only if the device is in HA mode.
Figure 3-121: Timing Module Information Page
212
Mediant 3000
Document #: LTRT-89707