SIP User's Manual
19.3
SBC Configuration Examples
This section provides SBC configuration examples.
Note:
19.3.1 Basic SBC Scenario
This example assumes the following:
The device is a deployed at the enterprise, interfacing between the IP-PBX on
Network 1 and the IP-PBX on Network 2.
Network 1 signaling leg IP address = 10.2.2.2:5080
Network 2 signaling leg IP address = 10.30.0.2:5070
IP-PBX on Network 1 = 10.2.2.6
IP-PBX on Network 2 = 10.30.0.3
The figure below illustrates this example scenario:
Version 6.4
The examples described in this section are for reference only. Modifications
to device configuration should be made to suit your networking environment.
Figure 19-23: SBC Example Scenario
417
19. Session Border Controller
November 2011