Searching For Configuration Parameters - AudioCodes Mediant 3000 User Manual

3.1.7

Searching for Configuration Parameters

The Web interface provides a search engine that allows you to search any ini file
parameter that is configurable in the Web interface (i.e., has a corresponding Web
parameter). You can search for a specific parameter (e.g., "EnableIPSec") or a substring of
that parameter (e.g., "sec"). If you search for a substring, all parameters containing the
searched substring in their names are listed.

To search for ini file parameters configurable in the Web interface:
1. On the Navigation bar, click the Search tab; the Search engine appears in the
Navigation pane.
2. In the 'Search' field, enter the parameter name or substring of the parameter name
that you want to search. If you have done a previous search for such a parameter,
instead of entering the required string, you can use the 'Search History' drop-down list
to select the string saved from a previous search.
3. Click Search; a list of located parameters based on your search appears in the
Navigation pane. Each searched result displays the following:
•
ini file parameter name
•
Link (in green) to its location (page) in the Web interface
•
Brief description of the parameter
4. In the searched list, click the required parameter (link in green) to open the page in
which the parameter appears; the relevant page opens in the Work pane and the
searched parameter is highlighted in the page for easy identification, as shown in the
figure below:
SIP User's Manual
Figure 3-18: Searched Result Screen
54
Mediant 3000
Document #: LTRT-89712