AudioCodes Mediant 3000 User Manual page 595

SIP User's Manual
Parameter
Proxy Set Table
Web: Proxy Set Table
EMS: Proxy Set
[ProxySet]
Registrar Parameters
Web: Enable Registration
EMS: Is Register Needed
[IsRegisterNeeded]
Web/EMS: Registrar Name
[RegistrarName]
Web: Registrar IP Address
EMS: Registrar IP
Version 6.4
215.

For configuring ini file table parameters, see 'Configuring ini
File Table Parameters' on page 88.
This parameter table configures the Proxy Set ID table. It is
used in conjunction with the ProxyIP ini file table parameter,
which defines the IP addresses per Proxy Set ID.
The ProxySet ini file table parameter defines additional
attributes per Proxy Set ID. This includes, for example, Proxy
keep-alive and load balancing and redundancy mechanisms (if
a Proxy Set contains more than one proxy address).
The format of this parameter is as follows:
[ProxySet]
FORMAT ProxySet_Index = ProxySet_EnableProxyKeepAlive,
ProxySet_ProxyKeepAliveTime,
ProxySet_ProxyLoadBalancingMethod,
ProxySet_IsProxyHotSwap, ProxySet_SRD,
ProxySet_ClassificationInput,
ProxySet_ProxyRedundancyMode;
[\ProxySet]
For example:
ProxySet 0 = 0, 60, 0, 0, 0, , 1;
ProxySet 1 = 1, 60, 1, 0, 1, , 0;
Notes:

This table parameter can include up to 32 indices (0-31).

For configuring the Proxy Set IDs and their IP addresses,
use the parameter ProxyIP.

For configuring the Proxy Set ID table using the Web
interface and for a detailed description of the parameters of
this ini file table, see 'Configuring Proxy Sets Table' on page
215.

For configuring ini file table parameters, see 'Configuring ini
File Table Parameters' on page 88.
Enables the device to register to a Proxy/Registrar server.

[0] Disable = The device doesn't register to Proxy/Registrar
server (default).

[1] Enable = The device registers to Proxy/Registrar server
when the device is powered up and at every user-defined
interval (configured by the parameter RegistrationTime).
Note: The device sends a REGISTER request for each
channel or for the entire device (according to the
AuthenticationMode parameter).
Defines the Registrar domain name. If specified, the name is
used as the Request-URI in REGISTER messages. If it isn't
specified (default), the Registrar IP address, or Proxy name or
IP address is used instead.
The valid range is up to 100 characters.
Defines the IP address (or FQDN) and port number (optional)
of the Registrar server. The IP address is in dotted-decimal
595
32. Viewing Syslog Messages
Description
November 2011