d.
'Destination SRD = "0"
e.
Click Apply
Figure 19-34: IP-to-IP Routing Rules between IP Groups
19.3.2 SBC-to-PSTN Routing
This example describes how to setup the device for SBC-to-PSTN routing. This example is
based on the general scenario described in 'Basic SBC Scenario' on page 417, but in
addition the device is now connected to the PSTN network through an E1/T1 trunk
interface.
Figure 19-35: SBC Transcoding-to-PSTN Routing Example Setup
SIP User's Manual
426
Mediant 3000
Document #: LTRT-89712