AudioCodes Mediant 3000 User Manual page 395

SIP User's Manual

Option to send 400 "Bad Request" response if message request is rejected

Blacklist and whitelist for defined SIP methods (e.g., INVITE)

Blacklist and whitelist for defined SIP bodies

To configure SIP message policy rules:
1. Open the Message Policy Table page (Configuration tab > VoIP menu > SBC
submenu > Message Policy Table).
2. Click the Add button; the Add Record dialog box appears:
The policy defined above limits messages to 32768 characters, headers to 256
characters, bodies to 512 characters, limits number of headers to 16, and only permits
two bodies. Invalid requests are rejected. Only INVITE and BYE requests are
permitted and there are no restrictions on bodies.
3. Configure the SIP message policy rule as required. See the table below for a
description of each parameter.
4. Click Submit to apply your changes.
5. To save the changes to flash memory, see 'Saving Configuration' on page 478.
Parameter
Index
[MessagePolicy_Index]
Max Message Length
[MessagePolicy_MaxMessageLength]
Max Header Length
[MessagePolicy_MaxHeaderLength]
Version 6.4
Figure 19-14: Adding SIP Message Policy Rule
Table 19-3: SIP Message Policy Parameters
Defines the table index entry.
Defines the maximum SIP message length.
The valid value is up to 32768 characters.
Defines the maximum SIP header length.
The valid value is up to 256 characters.
Description
395
19. Session Border Controller
November 2011