AudioCodes Mediant 3000 User Manual page 238

4. From the 'Profile Preference' drop-down list, select the priority of the IP Profile, where
'1' is the lowest priority and '20' is the highest. If both IP and Tel profiles apply to the
same call, the coders and other common parameters (noted by an asterisk) of the
preferred Profile are applied to that call. If the Preference of the Tel and IP Profiles is
identical, the Tel Profile parameters are applied.
Note: If the coder lists of both IP and Tel Profiles apply to the same call, only the
coders common to both are used. The order of the coders is determined by the
preference.
5. Configure the parameters as required.
6. From the 'Coder Group' drop-down list, select the coder group that you want to assign
to the IP Profile. You can select the device's default coders (see 'Configuring Coders'
on page 231), or one of the coder groups you defined in the Coder Group Settings
page (see 'Configuring Coder Groups' on page 232).
7. Click Submit to apply your changes.
8. To save the changes to flash memory, see 'Saving Configuration' on page 478.
SIP User's Manual 238
Mediant 3000
Document #: LTRT-89712