AudioCodes Mediant 3000 User Manual page 403

SIP User's Manual

To configure SBC IP-to-IP routing rules:
1. Open the IP2IP Routing Table page (Configuration tab > VoIP menu > SBC
submenu > Routing SBC submenu > IP to IP Routing Table).
2. Click the Add button; the Add Record dialog box appears:
Figure 19-18: SBC IP2IP Routing Table - Add Record Dialog Box
3. Add an entry and then configure it according to the table below.
4. Click the Apply button to save your changes.
5. To save the changes to flash memory, see 'Saving Configuration' on page 478.
Parameter
Matching Characteristics
Source IP Group ID
[IP2IPRouting_SrcIPGroupID]
Version 6.4
Table 19-6: IP2IP Routing Table Parameters
Selects the IP Group from where the IP-to-IP call originated.
Typically, the IP Group of an incoming SIP dialog is
determined (or classified) using the 'Classification' table (see
'Configuring Classification Table' on page 397). If not used
(i.e., any IP Group), simply leave the field empty.
The default is -1.
403
19. Session Border Controller
Description
November 2011