Configuring Time Bands For Cost Groups - AudioCodes Mediant 3000 User Manual

3. Configure the parameters as required. For a description of the parameters, see the
table below.
4. Click Submit; the entry is added to the Cost Group table.
Parameter
Index
[CostGroupTable_Index]
Cost Group Name
[CostGroupTable_CostGroupName]
Default Connect Cost
[CostGroupTable_DefaultConnectionCost]
Default Time Cost
[CostGroupTable_DefaultMinuteCost]

13.2.2.3 Configuring Time Bands for Cost Groups

The procedure below describes how to configure Time Bands for a Cost Group. The time
band defines the day and time range for which the time band is applicable (e.g., from
Saturday 05:00 to Sunday 24:00) as well as the fixed call connection charge and call rate
per minute for this interval. Up to 70 time bands can be configured, and up to 21 time
bands can be assigned to each Cost Group.
Note:
SIP User's Manual
Table 13-8: Cost Group Table Description
You cannot define overlapping time bands.
Description
Defines the table index entry.
Defines an arbitrary name for the Cost Group.
The valid value is a string of up to 30 characters.
Note: Each Cost Group must have a unique name.
Defines the call connection cost (added as a fixed
charge to the call) for a call outside the time bands.
The valid value range is 0-65533. The default is 0.
Note: When calculating the cost of a call, if the
current time of the call is not within a time band
configured for the Cost Group, then this default
connection cost is used.
Defines the call charge per minute for a call outside
the time bands.
The valid value range is 0-65533. The default is 0.
Note: When calculating the cost of a call, if the
current time of the call is not within a time band
configured for the Cost Group, then this default
charge per minute is used.
200
Mediant 3000
Document #: LTRT-89712