Displaying Navigation Tree In Basic And Full View - AudioCodes Mediant 3000 User Manual

3.1.5.1

Displaying Navigation Tree in Basic and Full View

You can view an expanded or reduced Navigation tree display regarding the number of
listed menus and submenus. This is relevant when using the configuration tabs
(Configuration, Maintenance, and Status & Diagnostics) on the Navigation bar.
The Navigation tree menu can be displayed in one of two views:

Basic: displays only commonly used menus

Full: displays all the menus pertaining to a configuration tab
The advantage of the Basic view is that it prevents "cluttering" of the Navigation tree with
menus that may not be required. Therefore, a Basic view allows you to easily locate
required menus.

To toggle between Full and Basic view:

Select the Basic option, located below the Navigation bar, to display a reduced menu
tree; select the Full option to display all the menus. By default, the Basic option is
selected.
Note:
SIP User's Manual
Figure 3-5: Navigation Tree in Basic and Full View
•
After you reset the device, the Web GUI is displayed in Basic view.
•
When in Scenario mode (see Scenarios on page 55), the Navigation tree
is displayed in Full view (i.e., all menus are displayed in the Navigation
tree).
44
Mediant 3000
Document #: LTRT-89712