Application Example For 802.1Q Vlan - TP-Link T1700X-16TS User Manual

The following entries are displayed on this screen:
VLAN of Port

VLAN ID：
Name:
Operation:
Configuration Procedure:
Step Operation
1 Configure the PVID.
2 Create VLAN.
3 Modify/View VLAN.
4 Delete VLAN

6.2 Application Example for 802.1Q VLAN

Network Requirements

Switch A is connecting to PC A and Server B;

Switch B is connecting to PC B and Server A;

PC A and Server A is in the same VLAN;

PC B and Server B is in the same VLAN;

PCs in the two VLANs cannot communicate with each other.

Figure 6-6 View the Current VLAN of Port
Displays the ID number of VLAN.
Displays the user-defined description of VLAN.
Allows you to remove the port from the current VLAN.
Description
Optional. On the VLAN→802.1Q VLAN→Port Config page,
configure the PVID of the port basing on its connected device.
Required. On the VLAN→802.1Q VLAN→VLAN Config page,
click the Create button to create a VLAN. Enter the VLAN ID and
the name for the VLAN. Meanwhile, specify its member ports and
the link type of the ports.
Optional. On the VLAN→802.1Q VLAN→VLAN Config page,
click the Edit/Detail button to modify/view the information of the
corresponding VLAN.
Optional. On the VLAN→802.1Q VLAN→VLAN Config page,
select the desired entry to delete the corresponding VLAN by
clicking the Delete button.
65