TLV
Inventory TLV
LLDP-MED is configured on the Global Config, Port Config, Local Info and Neighbor Info
pages.
14.4.1 Global Config
On this page you can configure the LLDP-MED parameters of the device globally.
Choose the menu LLDP→ LLDP-MED→ Global Config to load the following page.
The following entries are displayed on this screen
LLDP-MED Parameters Config
Fast Start Count:
Device Class:
14.4.2 Port Config
On this page you can configure all ports' LLDP-MED parameters.
Choose the menu LLDP→ LLDP-MED→ Port Config to load the following page.
Description
The Inventory TLV set contains seven basic Inventory
management TLVs, that is, Hardware Revision TLV, Firmware
Revision TLV, Software Revision TLV, Serial Number TLV,
Manufacturer Name TLV, Model Name TLV and Asset ID
TLV. If support for any of the TLVs in the Inventory
Management set is implemented, then support for all
Inventory Management TLVs shall be implemented.
Figure 14-6 LLDP-MED Global Configuration
:
When LLDP-MED fast start mechanism is activated, multiple
LLDP-MED frames will be transmitted based on this parameter.
LLDP-MED devices are comprised of two primary device types:
Network Connectivity Devices and Endpoint Devices. In turn,
Endpoint Devices are composed of three defined Classes: Class I,
Class II and Class III. Bridge is a Network Connectivity Device.
252