Schedule Mode - TP-Link T1700X-16TS User Manual

The following entries are displayed on this screen:
Port Priority Config

UNIT:1/LAGS:
Select:
Port:
Priority:
LAG:
Configuration Procedure:
Step Operation
1 Select the port priority
2 Configure
relation between the 802.1P
priority and TC
3 Select a schedule mode

10.1.2 Schedule Mode

On this page you can select a schedule mode for the switch. When the network is congested, the
problem that many packets compete for resources must be solved, usually in the way of queue
scheduling. The switch will control the forwarding sequence of the packets according to the priority
queues and scheduling algorithms you set. On this switch, the priority levels are labeled as TC0,
TC1... TC7.
Choose the menu QoS→DiffServ→Schedule Mode to load the following page.
Click 1 to configure the physical ports. Click LAGS to configure
the link aggregation groups.
Select the desired port to configure its priority. It is multi-optional.
Displays the physical port number of the switch.
Specify the priority for the port.
Displays the LAG number which the port belongs to.
Description
Required. On QoS→DiffServ→Port Priority page,
configure the port priority.
the mapping Required. On QoS→DiffServ→802.1P Priority page,
configure the mapping relation between the 802.1P
priority and TC.
Required. On QoS→DiffServ→Schedule Mode page,
select a schedule mode.
Figure 10-7 Schedule Mode
161