Ipv6 Static Routing Config - TP-Link T1700X-16TS User Manual

Next Hop:
Distance:
Metric:
Interface Name:

9.3.2 IPv6 Static Routing Config

Choose the menu Routing→Static Routing→IPv6 Static Routing Config to load the following
page.
The following entries are displayed on this screen:
IPv6 Routing

IPv6 Routing:
IPv6 Static Routing Config

IPv6 Address:
Prefix Length:
Next Hop:
Distance:
IPv6 Static Route Table

Select:
IPv6 Address:
Prefix Length:
Displays the IP address to which the packet should be sent next.
Displays the distance metric of route. The smaller the distance,
the higher the priority.
Displays the metric of the route.
Displays the name of the VLAN interface.
Figure 9-8 Static Routing Config
Enable or disable the IPv6 routing feature.
Specify the destination IPv6 address of the packets.
Specify the prefix length of the IPv6 address.
Enter the IPv6 address to which the packet should be sent next.
Enter the distance metric of route. The smaller the distance, the
higher the priority.
Select the IPv6 static route entries to modify.
Displays the destination IPv6 address of the packets.
Displays the prefix length of the destination IPv6 address.
150