Static Routing; Ipv4 Static Routing Config - TP-Link T1700X-16TS User Manual

Next Hop:
Distance:
Metric:
Interface name:

9.3 Static Routing

Static routes are special routes manually configured by the administrator and cannot change
automatically with the network topology accordingly. Hence, static routes are commonly used in a
relative simple and stable network. Proper configuration of static routes can greatly improve
network performance.

9.3.1 IPv4 Static Routing Config

Choose the menu Routing→Static Routing→IPv4 Static Routing Config to load the following
page.
The following entries are displayed on this screen:
IPv4 Static Routing Config

Destination:
Subnet Mask:
Next Hop:
Distance:
IPv4 Static Route Table

Select:
Destination:
Subnet Mask:
Displays the IPv6 address to which the packet should be sent next.
Displays the management distance of the route. The smaller the
distance, the higher the priority.
Displays the metric of the route.
Displays the description of the egress interface.
Figure 9-7 Static Routing Config
Specify the destination IP address of the packets.
Specify the subnet mask of the destination IP address.
Enter the IP address to which the packet should be sent next.
Enter the distance metric of route. The smaller the distance, the
higher the priority.
Specify the static route entries to modify.
Displays the destination IP address of the packets.
Displays the subnet mask of the destination IP address.
149