Port Config - TP-Link T1700X-16TS User Manual

8.1.2 Port Config

On this page you can enable or disable the IGMP snooping and Fast Leave feature for ports of the
switch.
Choose the menu Multicast →IGMP Snooping →Port Config to load the following page.
The following entries are displayed on this screen:
Port Config

UNIT:1/LAGS:
Select:
Port:
IGMP Snooping:
Fast Leave:
LAG:
Figure 8-6 Port Config
Click 1 to configure the physical ports. Click LAGS to configure the
link aggregation groups.
Select the desired port for IGMP snooping feature configuration. It
is multi-optional.
Displays the port of the switch.
Enable/Disable IGMP snooping for the desired port.
Enable/Disable Fast Leave feature for the desired port. If Fast
Leave is enabled for a port, the switch will immediately remove
this port from the multicast group upon receiving IGMP leave
messages.
Displays the LAG number which the port belongs to.
111