Tacacs+ Server Config; Authentication Server Group Config - TP-Link T1700X-16TS User Manual

12.6.4 TACACS+ Server Config

This page is used to configure the authentication servers running the TACACS+ security protocols.
Choose the menu Network Security→ AAA→ TACACS+ Conifg to load the following page.
Configuration Procedure

Configure the TACACS+ server's IP and other relevant parameters under the Server Config.
View, edit and delete the configured TACACS+ servers in the Server list.
Entry Description

Server IP:
Timeout:
Shared Key:
Server Port:

12.6.5 Authentication Server Group Config

On this page users can group authentication servers running the same secure protocol for
authentication. The switch has two built-in authentication server group, one for RADIUS and the
other for TACACS+. These two server groups cannot be edited or deleted. The server entries in
one group are tried in the order they are added.
The server entries in one group are tried in the order they are added.
Figure 12-27 TACACS+ Server Config
Enter the IP of the server running the TACACS+ secure protocol.
Specify the time interval that the switch waits for the server to reply
before resending.
Enter the shared key between the TACACS+ server and the switch.
The TACACS+ server and the switch use the key string to encrypt
passwords and exchange responses.
Specify the TCP port used on the TACACS+ server for AAA.
218