Alg (Application Layer Gateway) - TP-Link Archer C6 User Manual

Chapter 10
To bind the unconnected device:
1 ) Click in the
2 ) Enter the MAC Address
Done!
Now you don't need to worry about ARP spoofing and ARP attacks!
10 4

ALG (Application Layer Gateway)

View your ALG (Application Layer Gateway) settings in this page. It is recommended to
keep them as default.
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2 Go to Advanced
Binding List section.
and IP Address
> Security > ALG.
that you want to bind.
Network Security
45