Snmp Community - TP-Link T1700X-16TS User Manual

User Table

Select:
User Name:
User Type:
Group Name:
Security Model:
Security Level:
Auth Mode:
Privacy Mode:
Operation:
Note:
The SNMP User and its Group should have the same Security Model and Security Level.

13.1.5 SNMP Community

SNMP v1 and SNMP v2c adopt community name authentication. The community name can limit
access to the SNMP agent from SNMP network management station, functioning as a password. If
SNMP v1 or SNMP v2c is employed, you can directly configure the SNMP Community on this
page without configuring SNMP Group and User.
Choose the menu SNMP→SNMP Config→SNMP Community to load the following page.
The following entries are displayed on this screen:
Community Config

Community Name:
Select the desired entry to delete the corresponding User. It is
multi-optional.
Displays the name of the User.
Displays the User Type.
Displays the Group Name of the User.
Displays the Security Model of the User.
Displays the Security Level of the User.
Displays the Authentication Mode of the User.
Displays the Privacy Mode of the User.
Click the Edit button to modify the Group of the User and click
the Modify button to apply.
Figure 13-7 SNMP Community
Enter the Community Name here.
231