Vlan - TP-Link TL-MR6400 User Manual

MAC Address - The physical address of the router, as seen from the LAN. The value can't

be changed.
IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation

(factory default: 192.168.1.1).
Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.
IGMP Proxy - If you want to watch TV through IGMP, please Enable it.


Note:
1) If you change the IP Address of LAN, you must use the new IP Address to log in to the router.
2)
If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP
server will change accordingly at the same time，while the Virtual Server and DMZ Host will not
take effect until they are re-configured
Click Save to make the settings effective.
5.5.4

VLAN

Go to Network → VLAN, You can configure the VLAN parameters for different application on
this page.
VLAN Enable - Configure the function according to your ISP, otherwise the internet could

.
-95-
TL-MR6400 User Guide