User Management; User Table - TP-Link T1700X-16TS User Manual

The following entries are displayed on this screen:
DST Config

DST Status:
Predefined Mode:
Recurring Mode:
Date Mode:
Note:
1. When the DST is disabled, the predefined mode, recurring mode and date mode cannot be
configured.
2. When the DST is enabled, the default daylight saving time is of European in predefined mode.

4.2 User Management

User Management functions to configure the user name and password for users to log on to the
Web management page with a certain access level so as to protect the settings of the switch from
being randomly changed.
The User Management function can be implemented on User Table and User Config pages.

4.2.1 User Table

On this page you can view the information about the current users of the switch.
Choose the menu System→User Management→User Table to load the following page.
Enable or disable the DST.
Select a predefined DST configuration.
USA: Second Sunday in March, 02:00 ~ First Sunday in

November, 02:00.
Australia: First Sunday in October, 02:00 ~ First Sunday in

April, 03:00.
Europe: Last Sunday in March, 01:00 ~ Last Sunday in

October, 01:00.
New Zealand: Last Sunday in September, 02:00 ~ First

Sunday in April, 03:00.
Specify the DST configuration in recurring mode. This
configuration is recurring in use.
Offset: Specify the time adding in minutes when Daylight

Saving Time comes.
Start/End Time: Select starting time and ending time of

Daylight Saving Time.
Specify the DST configuration in Date mode. This configuration is
one-off in use.
Offset: Specify the time adding in minutes when Daylight

Saving Time comes.
Start/End Time: Select starting time and ending time of

Daylight Saving Time.
15