Snmp User - TP-Link T1700X-16TS User Manual

Read View:
Write View:
Notify View:
Group Table

Select:
Group Name:
Security Model:
Security Level:
Read View:
Write View:
Notify View:
Operation:
Note:
Every Group should contain a Read View. The default Read View is viewDefault.

13.1.4 SNMP User

The User in a SNMP Group can manage the switch via the management station software. The
User and its Group have the same security level and access right. You can configure the SNMP
User on this page.
Select the View to be the Read View. The management access is
restricted to read-only, and changes cannot be made to the
assigned SNMP View.
Select the View to be the Write View. The management access is
writing only and changes can be made to the assigned SNMP View.
The View defined both as the Read View and the Write View can be
read and modified.
Select the View to be the Notify View. The management station can
receive trap messages of the assigned SNMP view generated by
the switch's SNMP agent.
Select the desired entry to delete the corresponding group. It is
multi-optional.
Displays the Group Name here.
Displays the Security Model of the group.
Displays the Security Level of the group.
Displays the Read View name in the entry.
Displays the Write View name in the entry.
Displays the Notify View name in the entry.
Click the Edit button to modify the Views in the entry and click the
Modify button to apply.
229