Port Config - TP-Link TL-ER604W User Manual

Port:
Ingress Limit:
Ingress Rate:
Egress Limit:
Egress Rate:
The first entry in Figure 3-20 indicates: The Ingress and Egress Limits are enabled for port 1. The
Ingress and Egress Rates are 1Mbps. That is, the receiving rate for the ingress packets will not exceed
1Mbps, and the transmitting rate for all the egress packets will not exceed 1Mbps.
3.1 .6.4

Port Config

On this page, you can configure the basic parameters for the ports.
Choose the menu Network→Switch→Port Config to load the following page.
The following items are displayed on this screen:
 Port Config
Status:
Flow Control:
Negotiation Mode:
All Ports:
Displays the port number.
Specify whether to enable the Ingress Limit feature.
Specify the limit rate for the ingress packets.
Specify whether to enable Egress Limit feature.
Specify the limit rate for the egress packets.
Figure 3-21 Port Config
Specify whether to enable the port. The packets can be transported via this
port after being enabled.
Allows you to enable/disable the Flow Control function.
Select the Negotiation Mode for the port.
Allows you to configure the parameters for all the ports at one time.
-35-