Advanced Routing; Static Routing List - TP-Link TL-MR6400 User Manual

4.14 Advanced Routing

There are two submenus under the Advanced Routing menu:
Routing Table. Click any of them, and you will be able to configure the corresponding function.

4.14.1 Static Routing List

Go to Advanced Routing
screen. A static route is a pre-determined path that network information must travel to reach a
specific host or network.
To add static routing entries:
1. Click Add New..., you will see the following screen.
2. Enter the following data:
Destination Network

that you want to assign to a static route.
Subnet Mask

network portion, and which portion is the host portion.
Static Routing
→
- The Destination Network
- The Subnet Mask determines which portion of an IP Address is the
Static Routing List
List, you can configure the static route in the next
is the address of the network or host
-65-
TL-MR6400 User Guide
and System