5.14.1
Static Routing List
Choose menu "
Advanced
configure the static route in the next screen (shown in Figure 5-80). A static route is a
pre-determined path that network information must travel to reach a specific host or network.
To add static routing entries:
1.
Click
shown in Figure 5-80, you will see the following screen.
Add New...
2.
Enter the following data:
Destination Network
you want to assign to a static route.
The
Subnet Mask -
network portion, and which portion is the host portion.
Default Gateway
between the router and the network or host.
3.
Select
or
Enabled
Disabled
4.
Click the
button to make the entry take effect.
Save
Other configurations for the entries:
Click the
button to delete the entry.
Delete
Click the
button to enable all the entries.
Enable All
Archer C8
Advanced Routing
Figure 5-80 Static Routing
Figure 5-81 Add or Modify a Static Route Entry
- The Destination Network is the address of the network or host that
determines which portion of an IP Address is the
Subnet Mask
- This is the IP Address of the gateway device that allows for contact
for this entry on the
AC1750 Wireless Dual Band Gigabit Router
Static Routing List
drop-down list.
Status
", and then you can