Power Failure; Cleaning; About This Guide - Funkwerk TR200aw User Manual

1 Introduction
6
overvoltage that can occur during storms. Consult your electrician about this.
• To prevent devices interfering with each other, do not install the device close to electronic
devices such as hi-fi systems, office equipment or microwave ovens. Do not install it near
heat sources such as radiators, or in damp rooms. The ambient temperature must not fall
below 5° C or exceed 40° C.

1.2.1 Power failure

In the event of a power failure (230V power supply) the device cannot operate.

1.3 Cleaning

You can clean your device easily. Use a damp cloth or antistatic cloth. Do not use solvents.
Never use a dry cloth; the electrostatic charge could cause electronic faults. Make sure that
no moisture can enter the device and cause damage.

1.4 About this guide

Area of validity
This document is valid for funkwerk devices with system software as of software version
7.6.1.
The Reference, which you have in front of you, contains the following chapters:
User's Guide - Reference
Chapter
Quick Install Guide
Technical Data
Access and Configura-
tion
System Management
Physical Interfaces
Funkwerk Enterprise Communications GmbH
Description
This contains instructions for how to set up and start up your
device and create a basic configuration in just a few minutes
(see Initial steps on page 9).
This section contains a description of all the device's technical
properties.
This includes explanations about the different access and con-
figuration methods.
These chapters describe all configuration options of the Funk-
werk Configuration Interface. The chapters are based on the
navigation structure.
funkwerk TR200aw/bw