Setting Startup Time - Canon imageRUNNER 2545i System Settings Manual
Hide thumbs
Also See for imageRUNNER 2545i:
- Sending and facsimile manual (321 pages) ,
- Reference manual (264 pages) ,
- Printer manual (148 pages)
Table of Contents
Advertisement
Setting Startup Time
If you connect the machine to a switching hub, it may not be able to connect to a
network even though your network settings are set correctly.
This occurs because the spanning tree process performed between switching hubs
prevents them from communicating with each other immediately after the machine
connects to a switching hub.
In this case, use the procedure below to delay the start of communication.
IMPORTANT
Changes made to Startup Time Settings become effective when the machine is
restarted. To restart the machine, turn it OFF, wait at least 10 seconds, and then turn it
ON. For instructions on how to turn the machine ON and OFF, see Chapter 2, "Before
You Start Using the Machine," in the User's Guide.
NOTE
The default setting is '0 sec(s)'.
1
Press
(Additional Functions)
➞ [System Settings] ➞ [Network
Settings].
Setting Startup Time
7
7-3
Advertisement
Table of Contents
