Setting Up The Machine For Printing/Sending Faxes From A Computer; Setting Up The Machine For Your Network Environment - Canon imageRUNNER 2545i System Settings Manual

Hide thumbs Also See for imageRUNNER 2545i:
Table of Contents

Advertisement

5
Setting up the Machine for Printing/Sending Faxes from a
1
Computer
Follow the setup procedure described here to set up the machine for printing and
sending faxes from a computer.
IMPORTANT
• Sending faxes from a computer is available only when the optional Super G3 Fax
Board-AG1 is attached to the machine.
• If you are printing from a computer over a TCP/IP network, you can use the following
application protocols:
- LPD
- Raw (Windows 2000/XP/Vista/7/Server 2003/Server 2008 only)
- WSD (Windows Vista/7/Server 2008 only)
NOTE
For details about system requirements, see "Printing or Sending a Fax from a
Computer," on p. 1-14.
1
2
3
1-20
Setup Procedure
IP Address Settings (See "Specifying the Machine's IP Address," on p. 2-15.)
Specify the machine's network address and establish a connection to a computer on your network. Any of
the following can be used to specify the settings:
• The machine's control panel (Additional Functions menu)
• The Remote UI (via a web browser)
Connect the machine to a computer
• Connection via a network
Follow the procedure described in "Connecting the Machine to a Network," on p. 1-19.
• Connection via a USB cable*
Follow the procedure described in Chapter 1, "Machine Installation," in the User's Guide.
* In this case, proceed to step 3.
Set up the machine according to your network environment (See Chapter 3,

"Setting up the Machine for Your Network Environment.")

Any of the following can be used to specify the settings:
• The Machine's control panel (Additional Functions menu)
• The Remote UI (via a web browser)
Install drivers in the computer (See "Setting up a Computer for Printing/
Sending a Fax", on p. 5-2.)

Advertisement

Table of Contents
loading

Table of Contents